Battery Meters | Hour Meters | Auto Gauges

116 Reynolds Lane

West Grove, PA 19390

jim@propowerllc.com

302-228-8450

 

ProPower Emergency Supply, LLC sells battery discharge indicators for all battery powered equipment including golf carts (EZGO, Yamaha, Club Car), forklift trucks, EV, medical devices; hour meters and automotive gauges

Battery Discharge Indicators

Solar, EV, Golf Cart Battery Indicator, meter, gauge 12, 24, 36 or 48 Volt Rect

Only One LED lights at a time.

Battery Condition Indicator -Solar System, Forklift, Golf Cart or other 12, 24, 36 or 48 volt DC battery powered equipment.

This unit will work on both 12, 24, 36 or 48 volt systems.

For use on any equipment where the battery status is important.  It is specifically designed for battery power equipment to monitor the charge status of the battery or batteries.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

The only available instructions are provided below.

  • Battery Indicator Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt  - 12.34 volts full; 10.38 volts Empty24 Volt - 24.65 volts full; 20.76 volts empty

Weight

2 Ounces

Voltage Supply

12 -48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

0.2 to 0.3 Watts

Dimensions

  • Width 2.125"
  • Depth Behind front meter flange to end of mounting screws  - 1 15/16 inches
  • Hole size - 1 3/8 " wide by 15/16" 

Installation Connections

The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries.
When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected).
"C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. 
NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter.
R Terminal - An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

We ship  meters within 24 hours of payment or next business day.

Warranty: 3 months from the date of sale.

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...

Round battery indicator (horizontal display)

*Only One LED lights at a time

* Prevent Dead Battery

*Warning level set at 10% remaining charge

*Internal relay logic output for operating accessory equipment

*Water Proof

*Fits 2" cutout. Outside diameter 2.25".

Battery Discharge Indicator

The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED. As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.

At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.

At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow. When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION:  This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Meter Voltage Ranges:

12 Volt - 10.38 to 12.34 volts, High Voltage Reset 13.67 Volts

24 Volt - 20.76 to 24.65 volts, High Voltage Reset 27.2

36 Volt - 31.14 to 36.98 volts, High Voltage Reset 40.8 Volts

48 Volt - 41.52 to 49.31 volts, High Voltage Reset 54.4 Volts

72 Volts - 62.28 to 73.96 volts, High Voltage Reset 81.6 Volts

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...

Round battery indicator (vertical display)

 

* Prevent running low on battery power

* At 30% of charge, a flashing LED signals "Energy Reserve" alert

* At 20%, alternately flashing LEDs provide "empty" status warning

* Key switch activated LED display

* Recognizes improperly charged battery

* Water Proof

* Only one LED lights at a time to save battery power

Battery Discharge Indicator for Forklift, Golf Cart or other 36 volt DC battery powered equipment.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

* Description

The BDI is a high performance, low cost, easy to install Battery Charge meter (BDI). It is completely solid state and provides a reliable, accurate, and easy to read display of battery state-of-charge. This battery chargemeter is ideal for golf cars, hunting buggies, commercial leaning equipment, mobility aids, electric bicycles and other similar equipments.

* Features

-  A 10-bar high light LED displays the state of charge successively, bar by bar.

- At 70% depth of discharge, a flashing LED signals an “energy reserve” alert.

- At 80%, alternately flashing LEDs provides an “empty” status warning.

- It is compact and easy to install.

- Recognizes improperly charged battery.

- Key switch activated LED display.

* Terminals and Wiring

- Brown to + volts, 12, 24, 36 or 48 depending upon meter purchased

- Blue to Battery  negative

-Yellow to Key Switch (on hot terminal when on)

* Specifications

- System Voltages: 36V

-Operating Voltage: ±25% of normal voltage

- Operating Temperature: – 20°C to +75°C

- Storage Temperature: – 40°C to +90°C

- Environmental Enclosure: IP46

- Shock & Vibration: SAE J 1378

- Case Material: ABS KJW

* Reset Conditions

Battery Charging Reset (BCR) During charging, the BDI will light LED bar by bar according to the increasing battery capacity, the BDI will reset to the full state when the BDI meas­ures the voltage per cell up to 2.35 volts or higher.

Open Circuit Reset (OCR) Upon reconnection of a battery, the BDI will reset to the full status if it meas­ures 2.09 volts per cell or higher.

* Installation Size

- Hole cutout: 2" diameter

- Overall front face witdth: 27/16"

- Depth fron front of mounting panel 2 1/4"

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...

Battery Discharge Indicator with Hour Meter

Round battery discharge indicators, with hour meter for all battery powered equipment including golf carts (EZGO, Yamaha, Club Car), forklift trucks, EV, medical devices and more. Contains Relay Output - Used to power Auxilliary devices - 90 Watts available The meters that we carry are of high quality and are water proof to meet the most demanding needs.

Battery Discharge Indicator with Hour Meter
BatHr
Battery Status Indicator for all batteries with state of charge of 1.73 volts empty to 2.05 volts full per cell.Hour MeterReads to 99999.9 HoursRelay OutputUsed to power Auxilliary devices - 90 Watts availableVoltage Ranges

* 12 volt range 10.5 to 12.47 volts or more - Reset voltage 13.67

* 36 volt range 31.1 to 36.98 volts or more - Reset voltage 40.8

* 48 volt range 41.52 to 49.31 volts or more - Reset voltage 54.4

The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th Green LED will light.

As the battery discharges, successively lower LEDs will light, the 9th, 8th, 7th and so on lighting only 1 LED at a time.

- At approximately 30% battery life, the #3 LED will light and the color is Yellow.

- At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.

- When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

Product Options
Combination of product variants is not available

Price: $39.95

Loading Updating cart...

Round battery indicator with hour meter – ADJUSTABLE

Adjustable Voltage Battery Discharge Indicator
adjbathr

A lot of engineering packaged in a small gauge.

This series of battery gauges are multi-functioning devices ... adjustable voltage range, separate controls for turning on the display and hour meter and an internal relay for powering auxiliary devices.

The battery gauge "empty" voltage reading can be adjusted to closely match the gauge to the actual battery level of charge. Seven battery voltage ranges can be selected for for each voltage range; 12, 24, 36 and 48 volt operation. See bottom of listing for range specifics.

The gauge is connected directly to the battery, but no display will show until a separate lead wire is taken to plus volts. The gauge is monitoring the battery all of the time. By having a separate connection to illuminate the display, it stops the battery from discharging if left for extended periods.

Another connection is used to enable the hour meter. Therefore it is possible to view the battery state of charge, but not accumulated hours until it is desired to do so.

An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

12 Volt Range selections

* Range L - 9.6 volts Empty; 12.38 Full

* Range M - 10.08 volts Empty; 12.37 Full

* Range N - 10.38 volts Empty; 12.36 Full

* Range O - 10.68 volts Empty; 12.35 Full

* Range P - 10.86 volts Empty; 12.35 Full

* Range Q - 11.04 volts Empty; 12.34 Full

* Range R - 11.16 volts Empty; 12.34 Full

24 Volt Range Selections

* Range L - 19.2 volts Empty; 24.76 Full

* Range M - 20.16 volts Empty; 24.73 Full

* Range N - 20.76 volts Empty; 24.72 Full

* Range O - 21.36 volts Empty; 24.70 Full

* Range P - 21.72 volts Empty; 24.69 Full

* Range Q - 22.08 volts Empty; 24.69 Full

* Range R - 22.32 volts Empty; 24.69 Full

36 Volt Range Selections

* Range L - 28.8 volts Empty; 37.13 Full

* Range M - 30.24 volts Empty; 37.1 Full

* Range N - 31.14 volts Empty; 37.08 Full

* Range O - 32.04 volts Empty; 37.06 Full

* Range P - 32.58 volts Empty; 37.04 Full

* Range Q - 33.12 volts Empty; 37.03 Full

* Range R - 33.48 volts Empty; 37.03 Full

48 Volt Range Selections

* Range L - 38.4 volts Empty; 49.51 Full

* Range M - 40.32 volts Empty; 49.47 Full

* Range N - 41.52 volts Empty; 49.44 Full

* Range O - 42.72 volts Empty; 49.41 Full

* Range P - 43.44 volts Empty; 49.39 Full

* Range Q - 44.16 volts Empty; 49.37 Full

* Range R - 44.64 volts Empty; 49.37 Full

Product Options
Combination of product variants is not available

Price: $44.99

Loading Updating cart...

Golf Cart Battery Indicator Meter EZGO Yamaha Club Car 12, 24, 36, 48 VDC

PRO12-48M Battery Indicator

  • Auto Ranging Battery Indicator - Connect to any fully charged lead acid battery system and the meter will select the proper range, for 12, 24, 36 or 48 Volt DC systems.
  • Works on all lead acid batteries as the meter can be set for one of two discharge curves found from different battery manufacturers.
    • Curve 1 - Standard Lead Acid batteries have a discharge curve of 10.4 volts empty to 12.34 volts full (multiply by 2, 3 or 4 to get the range for 24, 36 or 48 volt systems).
    • Cruve 2 - For newer designed "hot" acid batteries with a discharge curve of  11.5 volts empty to 12.7 volts full as found on Exide and Trojan deep cycle batteries  (multiply by 2, 3 or 4 to get the range for 24, 36 or 48 volt systems).
  • Internal Relay - can be wired for Normally Open or Normally closed operation - limited to 200 ma.
    • Relay opens or closes (depending on how you wire it) when the display shows fully discharged - flashing red #1 and yellow #2 LEDs
  • Can be used on forklifts, golf carts, solar sytems and any other battery powered equipment
  • Battery Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt Range - Cruve #1 12.34 volts Full; 10.38 volts Empty 

 

12 Volt Range- Cruve #2 12.72 volts Full; 11.56 volts Empty 

 

24 Volt Range - Cruve #1 24.65 volts Full; 20.76 volts Empty

 

24 Volt Range - Cruve #2 25.44 volts Full; 23.11 volts Empty

 

36 Volt Range - Cruve #1 36.98 volts Full; 31.14 volts Empty

 

36 Volt Range - Cruve #2 38.16 volts Full; 34.67 volts Empty

 

48 Volt Range - Cruve #1 49.31volts Full; 41.52 volts Empty

 

48 Volt Range - Cruve #2 50.88 volts Full; 46.23 volts Empty

 

Weight

2 Ounces

Voltage Supply

12, 24, 36 or 48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

20 ma max (0.020 Amps)

Dimensions

  • OD   2.25"
  • Depth Behind front meter flange to end of mating female connector - 1 7/16 inches
  • Hole size - 2 "

Price: $27.99

Loading Updating cart...

Automotive Gauges

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

Tachometers

5″ 4 in 1 Tachometer Shift Light 11 K Oil & Water Temp Oil in F Press in PSI

We sell only new equipment

All Sales are Final

Read Terms Below

Tach Operation 11K RPM

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Oil Pressure in PSI, Water Temp and Oil Temp Gauges in degrees F
  • Red Indicator on Black Trim.
  •  Comes with all necessary sensor units
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley and all sensors are new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $53.99

Loading Updating cart...

5″ Tachometer 10000 RPM Shift Light 7 Color Recall Stepper Motor – 8220

All Sales are Final

Read Terms Below

Slim Design - Only ~ 2 1/2" Deep Case

Stepper Motor Tach for higher precison

Tach Operation 10K RPM - Display Color Selectable

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Recall to see highest RPM attained 
  • Red Indicator on Black Trim.
  • Backlight Color Selectable - 7 Colors Available
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Case Depth is 2 1/2"
  • Works on standard coil and HEI ignition systems
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley isare new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $41.99

Loading Updating cart...

DC Powered Hour Meters

4 – 40 Volts AC or DC Hour Meter

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

Price: $21.95

Loading Updating cart...

ProPower LCD Water Proof Hour Meter- 9 to 38 VDC

LCD Hour Meter - Water Proof from the front

Works on all DC powered systems between 9 and 38 volts DC only.

  • Reading up to 99999.9 and then it resets to 00000.0.
  • Plus volts to either terminal - prevents misapplication.
  • Water Proof
  • Vibration resistant
  • No internal battery to go dead like many other LCD meters being sold
  • Runs from input signal voltage

Mounting Hardware Included: U-Shaped metal mounting bracket, electrical connector Spade Lugs.

  • Dimensions: Face OD 2.25"
  • Cut-out 2" (52mm)diameter nominal
  • Depth behind face flange is 2" to end of mounting all-thread
  • 2.25" to end of electrical connector

Price: $27.95

Loading Updating cart...

Hour Meter,Boat,Truck,Tractor – 6-80 VDC Rect 713

Water Resistant

Suitable for Marine and Outdoor Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

International Sales:

 International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 6 12 24 36 48 60 72 80 VDC

Water Resistant

2 3/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

10 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

Shipping Notice: Meters shipped via First Class mail normally arrive within 4 to 7 days (95% of shipments). 5% of shipments take up to 30 days. If you want to insure prompt delivery, you need to select Priority Mail.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter 10 to 80 Volts DC, Round Black Trim Ring

Water Proof for Marine and Outdoor applications.

2 1/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They can have anywhere from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

6 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.33"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

 

 

 

We ship  meters within 24 hours of payment or next business day.

International Sales: Meters shipped by International First Class mail have no tracking information. If you want tracking information, select International Priority Mail.

Warranty: 3 Months from date of sale.

Price: $15.99

Loading Updating cart...

AC Hour Meters

Hour Meter, Magneto powered – small engine 4/40VAC/VDC

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

 

Shipping Notice: Meters shipped via First Class mail can take up to 30 days or more for delivery. There is no tracking number with First Class mail.  If you want to insure prompt delivery, you need to select Priority Mail. First Class mail normally arrives within 4 to 7 days (93% of shipments). 7% of shipments take 30 days or more. We ship all shipments the same or next business day.

International Sales:  

International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $21.95

Loading Updating cart...

Hour Meter- Generator or any 100, 115 or 120Volts AC 60 hz

Water Resistant

 

Suitable for Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 100 to 120 Volts AC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

Price: $15.25

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 120 VAC

This hour meter operates on 120 Volts AC and is a general purpose, non-resetable, hour meter. For use on any equipment where hours of operation need to be monitored for maintenance such as generators, packaging machines, furnace fans or any other AC system. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

120 Volts AC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Meter Housing

Pages: 1 2 3Next >Last »

4 – 40 Volts AC or DC Hour Meter

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

Price: $21.95

Loading Updating cart...

ProPower LCD Water Proof Hour Meter- 9 to 38 VDC

LCD Hour Meter - Water Proof from the front

Works on all DC powered systems between 9 and 38 volts DC only.

  • Reading up to 99999.9 and then it resets to 00000.0.
  • Plus volts to either terminal - prevents misapplication.
  • Water Proof
  • Vibration resistant
  • No internal battery to go dead like many other LCD meters being sold
  • Runs from input signal voltage

Mounting Hardware Included: U-Shaped metal mounting bracket, electrical connector Spade Lugs.

  • Dimensions: Face OD 2.25"
  • Cut-out 2" (52mm)diameter nominal
  • Depth behind face flange is 2" to end of mounting all-thread
  • 2.25" to end of electrical connector

Price: $27.95

Loading Updating cart...

Hour Meter, Magneto powered – small engine 4/40VAC/VDC

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

 

Shipping Notice: Meters shipped via First Class mail can take up to 30 days or more for delivery. There is no tracking number with First Class mail.  If you want to insure prompt delivery, you need to select Priority Mail. First Class mail normally arrives within 4 to 7 days (93% of shipments). 7% of shipments take 30 days or more. We ship all shipments the same or next business day.

International Sales:  

International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $21.95

Loading Updating cart...

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

5″ 4 in 1 Tachometer Shift Light 11 K Oil & Water Temp Oil in F Press in PSI

We sell only new equipment

All Sales are Final

Read Terms Below

Tach Operation 11K RPM

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Oil Pressure in PSI, Water Temp and Oil Temp Gauges in degrees F
  • Red Indicator on Black Trim.
  •  Comes with all necessary sensor units
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley and all sensors are new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $53.99

Loading Updating cart...

Hour Meter,Boat,Truck,Tractor – 6-80 VDC Rect 713

Water Resistant

Suitable for Marine and Outdoor Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

International Sales:

 International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 6 12 24 36 48 60 72 80 VDC

Water Resistant

2 3/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

10 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

Shipping Notice: Meters shipped via First Class mail normally arrive within 4 to 7 days (95% of shipments). 5% of shipments take up to 30 days. If you want to insure prompt delivery, you need to select Priority Mail.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter 10 to 80 Volts DC, Round Black Trim Ring

Water Proof for Marine and Outdoor applications.

2 1/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They can have anywhere from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

6 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.33"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

 

 

 

We ship  meters within 24 hours of payment or next business day.

International Sales: Meters shipped by International First Class mail have no tracking information. If you want tracking information, select International Priority Mail.

Warranty: 3 Months from date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter- Generator or any 100, 115 or 120Volts AC 60 hz

Water Resistant

 

Suitable for Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 100 to 120 Volts AC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

Price: $15.25

Loading Updating cart...

Solar, EV, Golf Cart Battery Indicator, meter, gauge 12, 24, 36 or 48 Volt Rect

Only One LED lights at a time.

Battery Condition Indicator -Solar System, Forklift, Golf Cart or other 12, 24, 36 or 48 volt DC battery powered equipment.

This unit will work on both 12, 24, 36 or 48 volt systems.

For use on any equipment where the battery status is important.  It is specifically designed for battery power equipment to monitor the charge status of the battery or batteries.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

The only available instructions are provided below.

  • Battery Indicator Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt  - 12.34 volts full; 10.38 volts Empty24 Volt - 24.65 volts full; 20.76 volts empty

Weight

2 Ounces

Voltage Supply

12 -48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

0.2 to 0.3 Watts

Dimensions

  • Width 2.125"
  • Depth Behind front meter flange to end of mounting screws  - 1 15/16 inches
  • Hole size - 1 3/8 " wide by 15/16" 

Installation Connections

The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries.
When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected).
"C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. 
NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter.
R Terminal - An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

We ship  meters within 24 hours of payment or next business day.

Warranty: 3 months from the date of sale.

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...
Pages: 1 2 3Next >Last »

Auto 40 Series

Pages: 1 2 3Next >Last »

4 – 40 Volts AC or DC Hour Meter

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

Price: $21.95

Loading Updating cart...

ProPower LCD Water Proof Hour Meter- 9 to 38 VDC

LCD Hour Meter - Water Proof from the front

Works on all DC powered systems between 9 and 38 volts DC only.

  • Reading up to 99999.9 and then it resets to 00000.0.
  • Plus volts to either terminal - prevents misapplication.
  • Water Proof
  • Vibration resistant
  • No internal battery to go dead like many other LCD meters being sold
  • Runs from input signal voltage

Mounting Hardware Included: U-Shaped metal mounting bracket, electrical connector Spade Lugs.

  • Dimensions: Face OD 2.25"
  • Cut-out 2" (52mm)diameter nominal
  • Depth behind face flange is 2" to end of mounting all-thread
  • 2.25" to end of electrical connector

Price: $27.95

Loading Updating cart...

Hour Meter, Magneto powered – small engine 4/40VAC/VDC

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

 

Shipping Notice: Meters shipped via First Class mail can take up to 30 days or more for delivery. There is no tracking number with First Class mail.  If you want to insure prompt delivery, you need to select Priority Mail. First Class mail normally arrives within 4 to 7 days (93% of shipments). 7% of shipments take 30 days or more. We ship all shipments the same or next business day.

International Sales:  

International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $21.95

Loading Updating cart...

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

5″ 4 in 1 Tachometer Shift Light 11 K Oil & Water Temp Oil in F Press in PSI

We sell only new equipment

All Sales are Final

Read Terms Below

Tach Operation 11K RPM

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Oil Pressure in PSI, Water Temp and Oil Temp Gauges in degrees F
  • Red Indicator on Black Trim.
  •  Comes with all necessary sensor units
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley and all sensors are new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $53.99

Loading Updating cart...

Hour Meter,Boat,Truck,Tractor – 6-80 VDC Rect 713

Water Resistant

Suitable for Marine and Outdoor Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

International Sales:

 International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 6 12 24 36 48 60 72 80 VDC

Water Resistant

2 3/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

10 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

Shipping Notice: Meters shipped via First Class mail normally arrive within 4 to 7 days (95% of shipments). 5% of shipments take up to 30 days. If you want to insure prompt delivery, you need to select Priority Mail.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter 10 to 80 Volts DC, Round Black Trim Ring

Water Proof for Marine and Outdoor applications.

2 1/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They can have anywhere from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

6 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.33"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

 

 

 

We ship  meters within 24 hours of payment or next business day.

International Sales: Meters shipped by International First Class mail have no tracking information. If you want tracking information, select International Priority Mail.

Warranty: 3 Months from date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter- Generator or any 100, 115 or 120Volts AC 60 hz

Water Resistant

 

Suitable for Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 100 to 120 Volts AC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

Price: $15.25

Loading Updating cart...

Solar, EV, Golf Cart Battery Indicator, meter, gauge 12, 24, 36 or 48 Volt Rect

Only One LED lights at a time.

Battery Condition Indicator -Solar System, Forklift, Golf Cart or other 12, 24, 36 or 48 volt DC battery powered equipment.

This unit will work on both 12, 24, 36 or 48 volt systems.

For use on any equipment where the battery status is important.  It is specifically designed for battery power equipment to monitor the charge status of the battery or batteries.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

The only available instructions are provided below.

  • Battery Indicator Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt  - 12.34 volts full; 10.38 volts Empty24 Volt - 24.65 volts full; 20.76 volts empty

Weight

2 Ounces

Voltage Supply

12 -48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

0.2 to 0.3 Watts

Dimensions

  • Width 2.125"
  • Depth Behind front meter flange to end of mounting screws  - 1 15/16 inches
  • Hole size - 1 3/8 " wide by 15/16" 

Installation Connections

The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries.
When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected).
"C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. 
NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter.
R Terminal - An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

We ship  meters within 24 hours of payment or next business day.

Warranty: 3 months from the date of sale.

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...
Pages: 1 2 3Next >Last »

Auto 90 Series

Pages: 1 2 3Next >Last »

4 – 40 Volts AC or DC Hour Meter

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

Price: $21.95

Loading Updating cart...

ProPower LCD Water Proof Hour Meter- 9 to 38 VDC

LCD Hour Meter - Water Proof from the front

Works on all DC powered systems between 9 and 38 volts DC only.

  • Reading up to 99999.9 and then it resets to 00000.0.
  • Plus volts to either terminal - prevents misapplication.
  • Water Proof
  • Vibration resistant
  • No internal battery to go dead like many other LCD meters being sold
  • Runs from input signal voltage

Mounting Hardware Included: U-Shaped metal mounting bracket, electrical connector Spade Lugs.

  • Dimensions: Face OD 2.25"
  • Cut-out 2" (52mm)diameter nominal
  • Depth behind face flange is 2" to end of mounting all-thread
  • 2.25" to end of electrical connector

Price: $27.95

Loading Updating cart...

Hour Meter, Magneto powered – small engine 4/40VAC/VDC

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

 

Shipping Notice: Meters shipped via First Class mail can take up to 30 days or more for delivery. There is no tracking number with First Class mail.  If you want to insure prompt delivery, you need to select Priority Mail. First Class mail normally arrives within 4 to 7 days (93% of shipments). 7% of shipments take 30 days or more. We ship all shipments the same or next business day.

International Sales:  

International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $21.95

Loading Updating cart...

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

5″ 4 in 1 Tachometer Shift Light 11 K Oil & Water Temp Oil in F Press in PSI

We sell only new equipment

All Sales are Final

Read Terms Below

Tach Operation 11K RPM

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Oil Pressure in PSI, Water Temp and Oil Temp Gauges in degrees F
  • Red Indicator on Black Trim.
  •  Comes with all necessary sensor units
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley and all sensors are new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $53.99

Loading Updating cart...

Hour Meter,Boat,Truck,Tractor – 6-80 VDC Rect 713

Water Resistant

Suitable for Marine and Outdoor Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

International Sales:

 International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 6 12 24 36 48 60 72 80 VDC

Water Resistant

2 3/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

10 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

Shipping Notice: Meters shipped via First Class mail normally arrive within 4 to 7 days (95% of shipments). 5% of shipments take up to 30 days. If you want to insure prompt delivery, you need to select Priority Mail.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter 10 to 80 Volts DC, Round Black Trim Ring

Water Proof for Marine and Outdoor applications.

2 1/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They can have anywhere from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

6 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.33"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

 

 

 

We ship  meters within 24 hours of payment or next business day.

International Sales: Meters shipped by International First Class mail have no tracking information. If you want tracking information, select International Priority Mail.

Warranty: 3 Months from date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter- Generator or any 100, 115 or 120Volts AC 60 hz

Water Resistant

 

Suitable for Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 100 to 120 Volts AC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

Price: $15.25

Loading Updating cart...

Solar, EV, Golf Cart Battery Indicator, meter, gauge 12, 24, 36 or 48 Volt Rect

Only One LED lights at a time.

Battery Condition Indicator -Solar System, Forklift, Golf Cart or other 12, 24, 36 or 48 volt DC battery powered equipment.

This unit will work on both 12, 24, 36 or 48 volt systems.

For use on any equipment where the battery status is important.  It is specifically designed for battery power equipment to monitor the charge status of the battery or batteries.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

The only available instructions are provided below.

  • Battery Indicator Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt  - 12.34 volts full; 10.38 volts Empty24 Volt - 24.65 volts full; 20.76 volts empty

Weight

2 Ounces

Voltage Supply

12 -48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

0.2 to 0.3 Watts

Dimensions

  • Width 2.125"
  • Depth Behind front meter flange to end of mounting screws  - 1 15/16 inches
  • Hole size - 1 3/8 " wide by 15/16" 

Installation Connections

The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries.
When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected).
"C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. 
NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter.
R Terminal - An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

We ship  meters within 24 hours of payment or next business day.

Warranty: 3 months from the date of sale.

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...
Pages: 1 2 3Next >Last »

Auto 201 Series

2″ Water Temperature Gauge Temp 100-250F, 40-120C by ProPower

Backlighted Water Temperature Gauge

  • 2"  Water Temperature Gauge
  • Dual Scale 100 to 250F and 40 to 120C
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2 "

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.50

Loading Updating cart...

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

2″ Volt Meter 12 Volt (8-16 volts) car boat truck atv

Backlighted Volt Meter for 12 volt System

Under normal operating conditions, the volt meter should read between 13 to 15 volts at usual road speeds. Lower readings will result in a discharged battery while higher readings would indicate that the charging system is not operating correctly and can lead to battery damage.

  • 2"  Volt Meter
  • Scale 8 - 16 volts
  • Back-Lit for night operation
  • Includes Mounting Brackets, Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2" hole or
  • 12 volt systems
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + volt supply in to meter 
  • - Threaded terminal for connecting to engine ground

Price: $15.99

Loading Updating cart...

2″ Ammeter 60-0-60 AMP Meter 12 Volt car boat truck atv

Backlighted Amp Meter for 12 volt System

  • 2"  Ammeter Gauge
  • Scale 60 - 0 - 60
  • Back-Lit for night operation
  • Includes Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2" hole
  • 12 volt systems
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 1 5/16"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + volt supply in to meter 
  • - Threaded terminal for connecting + volt supply out of meter

Price: $16.99

Loading Updating cart...

2″Oil Pressure Meter Gauge 12 Volt car boat truck atv

Backlighted Oil Pressure Meter for 12 volt System

Oil pressure gauges are invaluable and will tell of pending oil pressure problems before the "idiot" light comes on. It can be used to identify low oil level or incorrect oil viscosity and more.

  • 2"  Oil Pressure Gauge
  • 1/8" NPT Presure Transducer Included
  • Scale 0 - 100 psi
  • Back-Lit for night operation
  • Includes Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2" hole or
  • 12 volt systems
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + 12 volt supply 
  • -  Threaded terminal for connecting - volt (ground)
  • S Terminal for connecting 18 gauge wire (not supplied) from sending unit to meter 

Price: $17.99

Loading Updating cart...

Auto 6000 Series

Pages: 1 2 3Next >Last »

4 – 40 Volts AC or DC Hour Meter

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

Price: $21.95

Loading Updating cart...

ProPower LCD Water Proof Hour Meter- 9 to 38 VDC

LCD Hour Meter - Water Proof from the front

Works on all DC powered systems between 9 and 38 volts DC only.

  • Reading up to 99999.9 and then it resets to 00000.0.
  • Plus volts to either terminal - prevents misapplication.
  • Water Proof
  • Vibration resistant
  • No internal battery to go dead like many other LCD meters being sold
  • Runs from input signal voltage

Mounting Hardware Included: U-Shaped metal mounting bracket, electrical connector Spade Lugs.

  • Dimensions: Face OD 2.25"
  • Cut-out 2" (52mm)diameter nominal
  • Depth behind face flange is 2" to end of mounting all-thread
  • 2.25" to end of electrical connector

Price: $27.95

Loading Updating cart...

Hour Meter, Magneto powered – small engine 4/40VAC/VDC

Water Proof

Suitable Outdoor Applications and small engines

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. Works on any AC or DC input voltage from 4 to 40 volts (4, 6, 8, 12, 24, 36 or 40 volts). Voltage source can be taken from alternator, switched battery supply voltage or Magneto with grounding wire.

Applications:

Great for chain saws, brush cutters, steamers, edgers, cultivators, pumps, generators, saws, pressure washers, turf rollers, sod cutters, snow blowers, scrubbers, lawn tractors, wood chippers, shredders, post hole borers, hedge trimmers, etc. In addition: autos, trucks, motorcycles, all-terrain vehicles, go-carts, jet skis, snowmobile, out board marine engines

  • Water Tight - These meters are manufactured to be water tight. The factory testing procedure is to submerge the meters to a depth of 18" for a period of 2 hours. Not suitable for direct high pressure washer stream.
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 4 to 40 Volts AC or DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16" and includes an adjustable retainer clip so that the meter can be mounted on material up to 7/16 inch thick. Meter depth behind the panel is 2 5/8 inches.

 

Shipping Notice: Meters shipped via First Class mail can take up to 30 days or more for delivery. There is no tracking number with First Class mail.  If you want to insure prompt delivery, you need to select Priority Mail. First Class mail normally arrives within 4 to 7 days (93% of shipments). 7% of shipments take 30 days or more. We ship all shipments the same or next business day.

International Sales:  

International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $21.95

Loading Updating cart...

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge - 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2"  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2" hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8" - fits most standard sizes - other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2"
  • Meter OD is 2 3/16"
  • Meter depth from front of panel to the end of the mounting studs is 2"

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart...

5″ 4 in 1 Tachometer Shift Light 11 K Oil & Water Temp Oil in F Press in PSI

We sell only new equipment

All Sales are Final

Read Terms Below

Tach Operation 11K RPM

  • For 4, 6 & 8 cylinder spark ignition engines only
    • Tach works on signal from standard factory electronic and high performance electronic racing ignitions
  • Shift light RPM is adjustable and lights up RED at preset RPM
  • Oil Pressure in PSI, Water Temp and Oil Temp Gauges in degrees F
  • Red Indicator on Black Trim.
  •  Comes with all necessary sensor units
  • Mounting Bracket Included - secures shift light to tach body and provides bracket to mount tach
  • Easy to install but a Professional Installer Is Highly Recommend

TERMS

The tachometer assembley and all sensors are new and have never been used. The instrument is non-returnable. Once you open the shipping package, it is yours.

The 3 month warranty supplied by the manufacturer will be honored for defective units or one that fails in the first 90 days after receipt of the tach assembly.

  • All shipping cost to and from our facility is to be born by the buyer regardless of cause
  • Inspect item upon receipt as newly shipped items, that have not been used, are returnable within 7 days after receipt. A 15% restocking fee will be charged to inspect any opened package. All original packaging and parts must be returned in like new condition.
  • Send email request for an RMA prior to shipment

Warranty Claims

 

  • If a part was successfully installed, went into service, and then failed, it may be eligible for warranty replacement. You must report to us through, our email, within 14 days of the failure. We will issue a Return Merchandise Authorization (RMA) number. Parts that are covered may be returned for exchange for like product replacement. Refunds are not issued on warranty items.
  • The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer.
  • Only items authorized for warranty service, that pass warranty inspection upon receipt, will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed after 30 days.
  • We are only responsible for product replacement per the manufacturer warranty guidelines. No other responsibilities or warranties are expressed or implied.
  • Buyer is required to follow our return policy for warranty claim.

Price: $53.99

Loading Updating cart...

Hour Meter,Boat,Truck,Tractor – 6-80 VDC Rect 713

Water Resistant

Suitable for Marine and Outdoor Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant
  • The meter has a positive and a negative lead for easy installation.

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

International Sales:

 International Priority Mail is trackable (depending on country of destination) and insurable.  However, this option is much more expensive.

We ship meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Round Hour Meter Surface or behind panel mnt 6 12 24 36 48 60 72 80 VDC

Water Resistant

2 3/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They will have either 0.1 or 0.2 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

10 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.77"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

Shipping Notice: Meters shipped via First Class mail normally arrive within 4 to 7 days (95% of shipments). 5% of shipments take up to 30 days. If you want to insure prompt delivery, you need to select Priority Mail.

If you do not select insurance and the meter is not delivered after shipment, you have no recourse with the seller.

We ship  meters within 24 hours of payment or next business day.

Warranty:  3 months from the date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter 10 to 80 Volts DC, Round Black Trim Ring

Water Proof for Marine and Outdoor applications.

2 1/4" Round Hour Meter

For use on any equipment where hours of operation want to be monitored such as cars, boats, trucks, generators, airplanes, heavy equipment, lawn tractors and others. These meters are 100% tested at the factory prior to shipment. They can have anywhere from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped.

Reading

99999.9 hours

Accuracy

1/10th hour, Quartz

Weight

2 Ounces

Voltage Supply

6 to 80 Volts DC

Temperature Range

-4 to 149 Fahrenheit; -20C to 65C

Power Consumption

2 Watts

Dimensions

  • OD   2.33"
  • Depth Behind front meter flange to end of spade lug - 1.62 inches
  • Hole size - 2"

 

 

 

We ship  meters within 24 hours of payment or next business day.

International Sales: Meters shipped by International First Class mail have no tracking information. If you want tracking information, select International Priority Mail.

Warranty: 3 Months from date of sale.

Price: $15.99

Loading Updating cart...

Hour Meter- Generator or any 100, 115 or 120Volts AC 60 hz

Water Resistant

 

Suitable for Applications where direct water contact is not made

This rectangular hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated.

  • Water Resistant - These meters are manufactured to be water resistant

The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 100 to 120 Volts AC. The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy.

It is designed to withstand vibration and shaking up to 8g and is rated to work between -10 degrees to 150 degrees Fahrenheit.

The hour meter fits in to a rectangular hole 15/16" x 1 7/16". Meter depth behind the panel is 2 5/8 inches.

 

Price: $15.25

Loading Updating cart...

Solar, EV, Golf Cart Battery Indicator, meter, gauge 12, 24, 36 or 48 Volt Rect

Only One LED lights at a time.

Battery Condition Indicator -Solar System, Forklift, Golf Cart or other 12, 24, 36 or 48 volt DC battery powered equipment.

This unit will work on both 12, 24, 36 or 48 volt systems.

For use on any equipment where the battery status is important.  It is specifically designed for battery power equipment to monitor the charge status of the battery or batteries.

Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation.

The only available instructions are provided below.

  • Battery Indicator Status
    • The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED.
    • As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED.
    • At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator.
    • At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow.
    • When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately.

It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries.

CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition.

Reading

10 LEDs, #10 being fully charged and #1 being fully discharged

Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment.

12 Volt  - 12.34 volts full; 10.38 volts Empty24 Volt - 24.65 volts full; 20.76 volts empty

Weight

2 Ounces

Voltage Supply

12 -48 Volts DC

Temperature Range

-40 to 185 Fahrenheit; -40C to 85C

Power Consumption

0.2 to 0.3 Watts

Dimensions

  • Width 2.125"
  • Depth Behind front meter flange to end of mounting screws  - 1 15/16 inches
  • Hole size - 1 3/8 " wide by 15/16" 

Installation Connections

The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries.
When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected).
"C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. 
NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter.
R Terminal - An internal relay logic output allows powering auxiliary devices using your external solid state relay. The relay logic output is present until the battery is "empty" at which time the logic output shuts off.

We ship  meters within 24 hours of payment or next business day.

Warranty: 3 months from the date of sale.

Product Options
Combination of product variants is not available

Price: $32.50

Loading Updating cart...
Pages: 1 2 3Next >Last »