Auto 201 Series

2″ Water Temperature Gauge Temp 100-250F, 40-120C by ProPower

Backlighted Water Temperature Gauge

  • 2″  Water Temperature Gauge
  • Dual Scale 100 to 250F and 40 to 120C
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Sender included - NPT 1/8″ - fits most standard sizes – other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2″
  • Meter OD is 2 3/16″
  • Meter depth from front of panel to the end of the mounting studs is 2 “

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.50

Loading Updating cart…

2″ Water Temperature Gauge (100 – 250 F) 12 volt

Backlighted Water Temperature Gauge – 12 volt system

For use on cars, trucks, heavy equipment, boats with inboard or outboard engines.

Water temperature tells a lot about the operation of your engine. A higher than normal water temperature indicates a low coolant level, blocked water intake, loose or missing fan and/or water pump belt or a plugged/leaking radiator.

Lower than normal oerating temperature indicates a defective thermostat.

  • 2″  Water Temperature Gauge
  • Scale 100 to 250F 
  • Back-Lit for night operation
  • Includes sturdy Metal Mounting Bracket, Lighting and Mounting Hardware
  • Mounting -
  •  Mount directly in 2″ hole or
    • Use self mounting bracket for under or on top of dash or other place 
  • Sender included - NPT 1/8″ - fits most standard sizes – other size adapters available at your local hardware or auto parts store
  • 12 volt systems
  • Suitable for all water cooled engines with sender thread connection
  • All you will need is 18 gauge stranded wire to make the necessary connections
  • Hole diameter is 2″
  • Meter OD is 2 3/16″
  • Meter depth from front of panel to the end of the mounting studs is 2″

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • S Threaded terminal for connecting sensor wire
  • + Threaded terminal for connecting + volt supply
  • - Threaded terminal for connecting system ground
  • Please remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element.

Price: $17.99

Loading Updating cart…

2″ Volt Meter 12 Volt (8-16 volts) car boat truck atv

Backlighted Volt Meter for 12 volt System

Under normal operating conditions, the volt meter should read between 13 to 15 volts at usual road speeds. Lower readings will result in a discharged battery while higher readings would indicate that the charging system is not operating correctly and can lead to battery damage.

  • 2″  Volt Meter
  • Scale 8 – 16 volts
  • Back-Lit for night operation
  • Includes Mounting Brackets, Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2″ hole or
  • 12 volt systems
  • Hole diameter is 2″
  • Meter OD is 2 3/16″
  • Meter depth from front of panel to the end of the mounting studs is 2″

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + volt supply in to meter 
  • - Threaded terminal for connecting to engine ground

Price: $15.99

Loading Updating cart…

2″ Ammeter 60-0-60 AMP Meter 12 Volt car boat truck atv

Backlighted Amp Meter for 12 volt System

  • 2″  Ammeter Gauge
  • Scale 60 – 0 – 60
  • Back-Lit for night operation
  • Includes Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2″ hole
  • 12 volt systems
  • Hole diameter is 2″
  • Meter OD is 2 3/16″
  • Meter depth from front of panel to the end of the mounting studs is 1 5/16″

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + volt supply in to meter 
  • - Threaded terminal for connecting + volt supply out of meter

Price: $16.99

Loading Updating cart…

2″Oil Pressure Meter Gauge 12 Volt car boat truck atv

Backlighted Oil Pressure Meter for 12 volt System

Oil pressure gauges are invaluable and will tell of pending oil pressure problems before the “idiot” light comes on. It can be used to identify low oil level or incorrect oil viscosity and more.

  • 2″  Oil Pressure Gauge
  • 1/8″ NPT Presure Transducer Included
  • Scale 0 – 100 psi
  • Back-Lit for night operation
  • Includes Lighting and Mounting Hardware
  • Mounting -
    •  Mount directly in 2″ hole or
  • 12 volt systems
  • Hole diameter is 2″
  • Meter OD is 2 3/16″
  • Meter depth from front of panel to the end of the mounting studs is 2″

Connections

  • Red wire lead for + volt supply to internal lamp; Black wire to system ground
  • + Threaded terminal for connecting + 12 volt supply 
  • -  Threaded terminal for connecting – volt (ground)
  • S Terminal for connecting 18 gauge wire (not supplied) from sending unit to meter 

Price: $17.99

Loading Updating cart…